Glowing Emissive Ores

Option 1 (1.21 and 1.21.1)

• Continuity
• Sinytra Connector - (Makes Fabric mods work on NeoForge)
• Sodium (NeoForge Version, 1.21.1+) or Embeddium

Option 2 (1.20.3 to 1.21.11)

• Glowing Emissive Ores - Fusion - (Needs to be above GEO in the load order)
• Fusion (Connected Textures)

Option 1 (1.16.5 to 1.21.1)

• MoreMCMeta (Forge)
• MoreMCMeta Emissive Textures (Forge)

Option 2 (1.18.2 or 1.19.2)

• Connectedness
• Rubidium

Option 3 (1.20.1, 1.21 or 1.21.1)

• Continuity
• Sinytra Connector - (Makes Fabric mods work on Forge)

Option 4 (1.12 to 1.12.2 + 1.14 to 1.21.11)

• Glowing Emissive Ores - Fusion - (Needs to be above GEO in the load order)
• Fusion (Connected Textures)

Option 5 (Not recommended)

• OptiFine

Option 1 (1.18.2 to 1.21.11)

• Continuity – (Only supports Emissive textures on version 1.18.2 or higher)
• Sodium - (Not needed, but I highly recommend this)
• Indium - (Only required if you're using versions of Sodium lower than 0.6)

Note: versions of Sodium lower than 0.6 are known to cause Z-fighting issues when combined with Continuity.

Option 2 (1.16.5 to 1.21.1)

• MoreMCMeta (Fabric)
• MoreMCMeta Emissive Textures (Fabric)

Option 3 (1.18 to 1.21.11)

• Glowing Emissive Ores - Fusion - (Needs to be above GEO in the load order)
• Fusion (Connected Textures)

Option 4 (Not recommended)

• OptiFine
• OptiFabric

There are currently 4 Minecraft Modloaders: NeoForge, Forge, Fabric, and Quilt. You will need to install different requirements depending on which Modloader you are using. I have listed all the possible combinations you can use for each Modloader in the requirements section.

I plan on playing a Forge modpack: First, I install "Glowing Emissive Ores", then test if it works (some packs come pre-installed with the requirements). If it doesn't work, then come back to this site and select the requirements tab. Next, I will choose either Option 1, 2, 3, or 4 depending on the version of Minecraft I am playing on. If I choose option 1, I will need to install both "MoreMCMeta (Forge)" and "MoreMCMeta Emissive Textures (Forge)". Finally, I will load the modpack up again and test it. For most modpacks, this should work.

• If the modpack crashes — try launching it at least three times, as large modpacks are sometimes prone to random crashes during startup.
• If the ores aren’t glowing or the modpack continues to crash — try a different option from the requirements list until you have tried all possible options. (If you've got Sinytra Connector installed, the only option that will work is Continuity)
• If you're using shaders and the ores only glow at certain times — look for a shader setting called “Floodfill” and disable it. Alternatively, use a different emissive ores resource pack that supports "LabPBR."
• If the ores are flickering - Try switching to a different requirements option, this issue was present in / caused by old versions of performance mods, like Embeddium, Rubiddium and Sodium. Newer versions of these mods fixed this issue, usually one of the other options won't have this visual bug.
• If you're still experiencing issues — feel free to leave a comment on my CurseForge page or join my Discord for quicker support.